Makita 18V 5 Piece Power Tool Kit with 2 x 5.0Ah Batteries & Charger T4TKIT-75

  

Makita 18V 5 Piece Power Tool Kit with 2 x 5.0Ah Batteries & Charger T4TKIT-75. 2 x BL1850 5.0Ah Li-ion Batteries. 1 x DC18RC Fast Charger. 1 x Duffle Heavy Duty Tool Bag. Makita DHP486Z Combi Drill Makita DTD154Z Impact Driver Makita DHR242Z Hammer Drill Makita DGA463Z Angle Grinder Makita DML815 Torch 2 x BL1850 18v 5.0Ah Battery 1 x DC18RC Charger 1 x Duffle Heavy Duty Tool Bag.

Forward / reverse rotation Single sleeve keyless chuck allows for easy bit installation/removal by one hand. Electric brake 2 mechanical gears.

Variable speed control by trigger Best possible ergonomic handle for drill-driver applications. Brushless motor LED job light All metal gear construction Metal gear housing Belt clip.

The DTD154 brushless impact driver features high operation efficiency with a 175Nm max torque, 4 pole motor, keyless single sleeve ¼ hex chuck, accepting M5 - M14 standard bolts, M4 - M8 machine screws making it ideal for repetitive screwdriving. The impact driver has a no load speed of 3600rpm providing up to 3800ipm, the percussive action saving time and effort, driving screws up to 30% faster than a conventional drill/driver, no pilot hole is needed even into hardwood. It features a maintenance free brushless motor for increased life, electronic brake, a conveniently located push button for forward and reverse and an LED job light with preglow for use in low visibility applications. The compact & lightweight 1.5kg design of the DTD154 makes transportation around the worksite easy without compromising on power, whilst the redesigned belt clip and ergonomic soft grip handle provides maximum user comfort reducing fatigue on prolonged use, providing greater tool control. The Makita DTD154Z is supplied as a tool only unit and has no batteries, charger or case making it the ideal way to build up an existing Makita 18V kit.

Batteries and charger are available separately. One touch slide chuck for SDS-plus bit. 3 mode operation Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30% Unique rubber joint construction Body only machine. Electronic current limiter for overload protection. Slide switch conveniently located for one hand operation.

12 pivoting positions with 0 to 170º swivel range 4 LED bulb for maximum illumination Lightweight and compact for work in tight spaces Accessory strap enables tool suspension for hands-free work 54 hours of continuous run-time. 2 x BL1850 18v 5.0Ah Battery 1 x DC18RC Charger 1 x Duffle Heavy Duty Tool Bag. Part Number: DHP486Z Barcode: 0088381739566 Voltage: 18 v Battery Type: Lithium-ion Chuck Capacity: 1.5 - 13 mm No Load Speed (Hi): 0 - 2,100 rpm No Load Speed (Lo): 0 - 550 rpm Blows per Minute (Hi) - ipm: 0 - 31,500 ipm Blows per Minute (Lo) - ipm: 0 - 8,250 ipm Max.

In wood: 76 mm Max. In masonry: 16 mm Max. In steel: 13 mm Torque Settings: 21 + Drill Vibration K factor: 1.5 m/sec² Noise sound pressure: 84 dB(A) Noise sound power: 95 dB(A) Noise K factor: 3 dB(A) Max.

Fastening Torque (Soft Joint): 65 Nm Max. Fastening Torque (Hard Joint): 130 Nm Vibration: Impact drilling into concrete: 8.0 m/sec² Vibration: Drilling into metal: 2.5 m/sec². Barcode: 0088381824125 175Nm Max Torque M5 - M14 Standard Bolt M4 - M8 Machine Screw No Load Speed 0-3800rpm. Barcode: 0088381654326 Battery Type - Lithium-ion Charging Time - 22 min Voltage - 18 v Capacity in Concrete - 24 mm Capacity in Steel - 13 mm Capacity in Wood - 27 mm Impact energy - 2.0 J Blows per minute - 0 - 4700 bpm No Load Speed (Hi) - 0 - 950 rpm Vibration: Drilling - 3.5 m/sec² Vibration K factor - 1.5 m/sec² Vibration: Hammer Drilling - 13.5 m/sec² Vibration: Chiselling - 10.5 m/sec².

Barcode: 0088381853514 Voltage - 18v Bore Diameter - 22.23mm Max Wheel Thickness - 6mm Noise sound pressure - 79dB(A) Noise K factor - 3dB(A) Max Wheel Diameter - 115mm No Load Speed - 8,500 rpm Vibration K factor - 1.5 m/sec² Vibration: Surface Grinding with Anti-Vibration Side Grip - 6.0 m/sec² Vibration: Surface Grinding - 6.5 m/sec². Part Number: DML815 Barcode: 0088381886970 Continuous Runtime: 6.0Ah - 54 hours Battery: 18V LXT Lithium-ion Lumens: 160 Luminous Flux: 160lm Illuminance at 1m: 3,000lx Overall Length: 272mm. Images for illustrative purposes only - please refer to description and specification for full details of product.

Additional charges will be imposed if, weight is more than 1kg. Postcodes Details are Given Below. HS 1-9, I 1-56, KA27-28, KW1-17, PA20-49, PA62-77, PA60-61, PA78, PH17-26, PH-30-44, PH49-50, ZE1-3, BT1-94, IM1-9, IM99, TR21-25, Isle Of Wight. If, you receive any Parcel from us that contains damaged goods, this should be notified to customer services who will arrange for collection and replacement, within the 24-48 hours period. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Tool Sets".

The seller is "tools4trade" and is located in this country: GB. This item can be shipped to United Kingdom.

1. Model: T4TKIT-75
2. Battery Included: Yes
3. Power Source: Battery
4. Type: Power Tool Kit
5. Number of Tools: 5
6. MPN: T4TKIT-75, DHP486Z, DTD154Z, DHR242Z, DGA463Z, DML815
7. EAN: 8906763309256
8. Number of Batteries: 2
9. Battery Technology: Lithium-Ion (Li-Ion)
10. Brand: Makita
11. Voltage: 18 V