Makita 18V 6 Piece Tool Kit with 3 x 5.0Ah Batteries Charger & 101 Accessory Set

  

Makita 18V 6 Piece Kit with 3 x 5.0Ah Batteries Charger with 101pc Accessory Set. Makita 18V 6 Piece Kit with 3 x 5.0Ah Batteries Charger & 101 Accessory Set T4TKIT-7316.

Makita DHP482Z 18V LXT Combi Drill Makita DTD152Z 18V LXT Impact Driver Makita DHR202Z 18V Rotary Hammer SDS Plus Makita DGA452Z 18V LXT Angle Grinder Makita DTM50Z 18V LXT Multi-Tool Makita. Electric brake Mechanical 2-speed control Variable speed control trigger Forward/reverse rotation Twin LED job light Ergonomic soft grip handle Compact overall length of 198mm Single sleeve keyless chuck Lightweight design Battery protection circuit All metal gears. Compact design with a short overall length of 138mm One-touch bit installation Fully Compatible with 18V 4.0Ah Battery with 36 minute charge time. LED job light with pre-glow and afterglow functions Enhanced dust and drip-proof performance New compact charger Compact and lightweight, 4-pole motor Ergonomically designed handle Lithium-ion battery, lighter weight, quicker charging and with more run time than an equal voltage Ni-Cad or Ni-MH battery. 22 minute charge time with the air cooled Makstar Optimum Charging System.

Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery. Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time. Conveniently located push button for forward and reverse.

LED job light with afterglow. One-touch sliding chuck for easy bit changes. Triple operation mode: Rotary only, hammer only and rotary hammer. Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions. Electric brake Variable speed control trigger Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current Forward and reverse trigger LED job light Ergonomic soft grip.

Thumb On/Off switch, positioned for ease of use when holding body of machine. Hex wrench holder on body. Accessories can be installed at 30º increments, across 360º Uses OIS interface. 12 pivoting positions with 0 to 170º swivel range 4 LED bulb for maximum illumination Lightweight and compact for work in tight spaces Accessory strap enables tool suspension for hands-free work 54 hours of continuous run-time.

1 x DC18RD Charger 3 x 5.0Ah BL1850 Li-Ion Batteries 1 x Excel 26 Padded Tool Bag 1 x 98C263 101 Piece Drilling/Driving Bit Accessory Set. 1 x Countersink 2 x Plastic screw finders 1 x Hex key 4 x Depth stops - #6, #8, #10 and #12 1 x Centre punch 13 x Nut drivers - 5-13mm 3 x Flat bits - 12, 16 and 19mm 6 x Titanium coated drill HSS drill bits - 3-6.5mm 6 x Masonry drill bits - 3-6.5mm 6 x HSS drill bits - 3-6.5mm 4 x Hole saws - 32, 38, 45 and 54mm 1 x Hole saw arbour 1 x Magnetic bit driver 1 x 60mm bit holder 30 x Screwdriver bits (25mm) 20 x Screwdriver bits (50mm) 1 x Spirit level.

Barcode: 0088381699051 Battery Type: Li-ion Voltage: 18V Max. Battery Type - Lithium-ion Voltage - 18v Electric Brake Variable Speed Control Impacts - 0-3200 ipm Drive shank Hex - 6.35mm (1/4)Reverse switch Standard Bolt - M5-M14 Joblight No Load Speed - 0-2300rpm Max Torque - 160Nm Vibration: Fastening Bolt - 15.5 m/sec² Vibration K factor - 2 m/sec².

Battery Type - Lithium-ion Charging Time - 22min Voltage - 18v Max in concrete - 20mm Max. In steel - 13mm Max. In wood - 26mm Impact energy - 2.0J Blows per minute - 0-4000bpm Noise sound pressure - 87dB(A) Noise sound power - 98dB(A) Noise K factor - 3dB(A) No Load Speed - 0-1100rpm Vibration: Drilling - 3 m/sec² Vibration K factor - 1.5 m/sec² Vibration: Hammer Drilling - 14.5 m/sec² Vibration: Chiselling - 11 m/sec². Grinding Wheel: 4-1/2" / 115mm Cut-Off Wheel: 4-1/2" Wire Cup Brush: 3-1/2" / 115mm Sanding Disc: 4-1/2" / 115mm No Load RPM: 10,000 Watt Hours: 54.0 Spindle Thread: 5/8" - 11 UNC Overall Length: 12-1/2".

Battery Type - Lithium-ion Charging Time - 22 min Voltage - 18v Oscillation Angle - 3.2 º Oscillations per Minute - 6000 - 20000 Vibration K factor - 1.5 m/sec² Vibration: Cutting Metal - 5 m/sec² Vibration: Cutting Wood - 9.5 m/sec² Vibration: Chiselling - 7.5 m/sec² Vibration: Sanding - 2.5 m/sec². Part Number: DML815 Barcode: 0088381886970 Continuous Runtime: 6.0Ah - 54 hours Battery: 18V LXT Lithium-ion Lumens: 160 Luminous Flux: 160lm Illuminance at 1m: 3,000lx Overall Length: 272mm. Additional charges will be imposed if, weight is more than 1kg. Postcodes Details are Given Below.

HS 1-9, I 1-56, KA27-28, KW1-17, PA20-49, PA62-77, PA60-61, PA78, PH17-26, PH-30-44, PH49-50, ZE1-3, BT1-94, IM1-9, IM99, TR21-25, Isle Of Wight. If, you receive any Parcel from us that contains damaged goods, this should be notified to customer services who will arrange for collection and replacement, within the 24-48 hours period. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Tool Sets". The seller is "tools4trade" and is located in this country: GB. This item can be shipped to United Kingdom.

1. Model: DLX6075M / 98C263
2. Battery Included: Yes
3. Power Source: Battery
4. Type: Cordless Tool Kit
5. Number of Tools: 6
6. MPN: DLX6075M, 98C263, DHP482Z, DTD152Z, DHR202Z, DGA452Z, DTM50Z, DML815
7. EAN: 8906763562385
8. Number of Batteries: 3
9. Battery Technology: Lithium-Ion (Li-Ion)
10. Brand: Makita
11. Voltage: 18 V